Types of BONDING AGENTS FOR AAC (AUTOCLAVED AERATED CONCRETE) AND CC (CEMENT CONCRETE) BLOCKS
* POLYALK SUPERBOND U: Bonding Agent for AAC Block to AAC Block & CC Brick Block to CC Brick Block
Used for CC bricks compound wall for bonding
The above process is done without the use of cement mortar and any need for water curing
It can be used in the area where there is scanty rainfall as well as a shortage of good-quality sand
As the polymer cures, the bond strength also increases
Non-ionic; hence, no possibility of an attack on concrete by ions like chlorides, alkalis, sulphates, etc
Wil

Improve your pharmacy's effectiveness with MocDoc's Pharmacy Management System. Our complete solution provides advanced tools to manage prescriptions, inventory, and stock levels efficiently. Bid farewell to manual tasks and embrace streamlined operations with our user-friendly software. From maintaining a detailed product catalog to seamless pharmacy billing, our solution empowers you to optimize every aspect of your medical store. Witness the transformative potential of our software firsthand and elevate your pharmacy to new levels of success. Unleash the full potential of your pharmacy wit

Types of GROUTS
* POLYEXPANSE: (M-45/M-65/M-80) Non-shrink free flow cementitious grout
Ready-to-use, flowable, self-leveling
Non-shrink
Provides excellent bearing
No reinforcement corrosion, discolouration, or efflorescence
Positive expansion of 1 to 2%
* SUNEPOXY 300: Low exotherm, high strength epoxy resin free flow grout
Non-shrink; hence offers excellent adhesion to many surfaces, including concrete and metal substrate
Low creep characteristics under sustained loading
High compressive strength, tensile and flexural strength
High resistance to dynamic loads and chemical attack

Types of CONCRETE ADMIXTURES
* POLYTANCRETE SPR: Slump retaining retarding superplasticiser
Conforms to IS: 9103:1999 and ASTM - C 494M - 99a, 1999 type G
Increased workability with reduced water
Flowing yet very cohesive
Easy to pump
High early strength due to high water reduction
Chloride free
* POLYTANCRETE NGT: Superplasticising admixture
Conforms to ASTM C 494 type F & IS 9103 for chemical admixture
Reduce water-cement ratio while maintaining workability
Increases strength of the concrete/ mortar by reducing water content

Types of INTUMESCENT PAINTS
* SUNNOFLAME IP: Water-based intumescent coating for structural steel
Fire-retarding interior coating
Reduces heat penetration, flame spread, and smoke generation
Applies like regular paint
Water-based with low VOCs
Durable, smooth architectural finish
Quick and easy application and clean up
Forms a thick cellular char blanket to retard the flame spread
* SUNNOFLAME IP 1709: Epoxy-based intumescent coating for structural steel
Reduces heat penetration, retards flame spread, and minimises smoke generation
Quick and easy application
It provides high hidin

Types of Curing Aids
SUNPOLICURE W: Water-based curing compound
Conforms to ASTM C 309-74
Works during a shortage of normal water or salt-free water
Shortage of labour
Controls additional costs involved in curing for the full specified period
* SUNPOLICURE I: Internal curing admixture
SUNPOLICURE I reduce water curing time.
Enhances concrete impermeability.
Decreases plastic shrinkage and long-term drying shrinkage.
Improves workability and pumpability of concrete when used with superplasticizer.
Prevents water evaporation from fresh concrete or mortar.
Enhances hydration of all c

In order to increase operational and energy efficiency, you are looking for new ways to make managing your facility easier. Sanrock Automation can successfully integrate, install and maintain building management systems and provide life cycle support for facilities like yours, making it easier to increase comfort, safety and security for your occupants.

We offer a scalable range of building management and intelligent building solutions and services from individual subsystems to fully integrated intelligent buildings that reduce risk while delivering world class operating and energy efficie

Utility Management System
SANSOFT
Runtime System - SANSOFT 21 CFR Part 11 Compliance web based SCADA software.
Administration Module :
User Management
Device Management
Dashboard Module
Reports and Audit Trail Logs
Dashboard Module :
Login / logout
Tabular data presentation of configured devices
Pictorial presentation of data of devices
Alerts on key parameter changes
Scope In detail
User Management :
Login / Logout
Add/Edit/Del/View of users
Password complexity
Password Expiry
Locking of user after 3 wrong attempts
Unlocking by administrator
Device Management :
Add/Edit

Types of TILE ADHESIVES AND TILE GROUTS
* POLYALK TF: Bonding agent for fixing all types of tiles
POLYALK TF can be easily mixed with white or grey cement
The matrix is watertight and has additional flexural and tensile properties
Tiles can be fixed on either dry or wet surfaces without any loss of bond strength
Fallen tiles may be re-fixed without disturbing the adjoining tiles
* POLYALK TA: Polymer-modified cementitious tile adhesive application
Conforms to BS 5980 –1980
Ready to use; only add water at the site
It can be applied directly on the substrate or tile in a single layer r

Types of FLOOR HARDENERS AND DENSIFIERS
* SUNFLORMETALLIN: Liquid surface hardener and dust proofer
Any surface oil from concrete floors can be easily removed
Water penetration and absorption were slightly reduced.
* POLYABRES: Dry shake non-metallic floor hardener [a ready-to-use 'dry shake on' product]
Conforms to ASTM C 418/ C 779
It is formulated with select cementitious binders
Formulated with added polymeric property enhancers and tested aggregates of proven hardness
Excellent abrasion resistance and impact resistance
Hard-wearing, resistant to mineral oils, non-slip, non-skid,

Features :
Advanced Microcontroller based DP measurement.
Software programmable channel ranges, units & resolution.
4 Digit, 0.56” bright LED display for displaying differential pressure.
Process parameter status indication with LEDs.
Process value violations display indication.
User selectable set limits for process value violation.
Inbuilt buzzer to audible process value violation.
Password protection for programming mode.
Software Calibration.
Proximity keypad to program DPI105DI and DPI105DE.
Specifications :
Input Type :
Inbuilt Integral Sensors
4 - 20mA
0 - 10VDC.
0 - 20

Features:
Door interlocking systems supports maximum of 16doors
Microcontroller based Door Interlocking System
User can configure Normally Closed mode or Normally Open mode
Configurable door closure time interval for 4 to 16 door interlocking systems
Pre-defined door closure time interval for 2 and 3 door interlocking systems
MODBUS RTU multi drop RS-485 serial communication for PLC, SCADA, etc.
Configurable door delay timer from Door Interlocking BMS System
Relay status Indications
“GO”,“WAIT” Door Status Indications along with Timer
It supports Emergency Stations with buzzer
It s

Styrax Instruments India Pvt. Ltd., has been one of the prominent manufacturers and suppliers of Process Measure and Control Systems, Clean room Interlocking Systems, Automation Solutions and hi-tech security and access control systems.

Our systems and products are engineered with excellent application options and implementations. Having established our credentials in the domestic and international market. We possess the capability of catering to the diverse requirements across multifarious industries.

In order to increase operational and energy efficiency, you are looking for new ways to make managing your facility easier. Sanrock Automation can successfully integrate, install and maintain building management systems and provide life cycle support for facilities like yours, making it easier to increase comfort, safety and security for your occupants.

We offer a scalable range of building management and intelligent building solutions and services from individual subsystems to fully integrated intelligent buildings that reduce risk while delivering world class operating and energy efficie

The STYRAX “Temperature and RH Transmitter” has been specially developed keeping process measurement requirements of CLEAN ROOMS in Pharmaceutical industries. RHT105 is a high-performance 4/3-wired Relative Humidity and Temperature Transmitter. Its relative humidity and temperature transmitter is available in surface mount, duct mount and remote sensor versions. This transmitter is accurate to 1.5% for relative humidity and within 0.3 °C for temperature.
Features :
Advanced Microcontroller based process measurement.
Software programmable measurement range settings.
5-point calibration for

NGO registration is the legal process of laying out a non-benefit association to work inside a particular purview. This commonly includes drafting the association's update of affiliation and standing rules as per important regulations for example, the Societies Registration Act 1860 or the Indian Trusts Act 1882. The expected records, alongside the application structure are submitted to the fitting government authority, like the Registrar of Societies for approval. Ours is One-stop solution for all your ngo consultancy related matters like 80g registration.

GPS/Server based Wired Clocks
Master Clock
6 digit 7 segment LED display.
0.8” seven segment LED to display Hours and Minutes.
0.5” seven segment LED to display Seconds.
LED Color : Red or Green.
Accuracy : ±2minutes per year at 25°C.
Battery backup for RTC : 3.6VDC Lithium-Ion.
Communication : RS-485.
Time format : 24Hrs.
No. of Slave : 32 without repeater.
Operating Voltage : 230VAC 25Watt.
Dimensions : 90mm L x250mm W x 45mm D.
Slave Clock
4 digit 7 segment 1”/2”/4” LED display to display Hours and Minutes.
6 digit 7 segment 1” LED display.LED Color: Red or Green.
Accuracy

Features :
Advanced Microcontroller based process measurement.
Programmable channel ranges and unit selections.
Programmable resolution.
4 Digit, 0.39”/0.56”/0.8”/1.0”/1.2”/1.5”/1.8”/2.0” bright 7- Segment LED display for displaying Temperature, RH and DP.
User selectable set limits for process value violation.
Process parameter status indication with 3 Bi-Color 3mm LEDs.
Inbuilt buzzer to audible process value violation.
Password protection for calibration and programming mode.
Software Calibration for 3 channels.
MODBUS RTU multi drop RS-485 serial communication for PLC, SCADA, et

Styrax Instruments India Pvt Ltd is the pioneer in the sector of Manufacturing and Supply of
“Process Measure & Control Systems, Door Interlocking Systems, Digital Clocks and Automation Solutions”. The company is tracking the path of progress with its innovative measures in gifting the
“best in sector” to its esteemed clients. The company’s excellent expertise and hardwork are the pillars of Styrax towards its success
Styrax Instruments India Pvt. Ltd., has been one of the prominent manufacturers and suppliers of Process Measure and Control Systems.

Clean room Interlocking Systems, Auto

SIPC is the premier provider of Pest Control Services in Bangalore, offering comprehensive solutions to eliminate pests and safeguard your property. Our skilled team utilizes advanced techniques and eco-friendly products to address a wide range of pest issues, including termites, rodents, cockroaches, ants, and more. With a deep understanding of Bangalore's pest challenges, we tailor our services to meet the specific needs of each client, ensuring effective pest management and long-term protection. Trust SIPC for reliable Pest Control Services that prioritize your safety and well-being. Clove